Home maintenance expert reveals the overlooked hotspots where mould thrives – from mattresses to washing machines – and the simple fixes that can help stop it

When most people think of mould, they picture bathroom ceilings or damp patches on walls. But according to a home maintenance expert, some of the biggest mould hotspots are hiding in places most homeowners never think to check.
With an estimated two million people in England living in homes affected by damp or mould—conditions linked to around 5,000 asthma cases and 8,500 respiratory infections every year—experts are urging people to look beyond the obvious.
Paul Kershaw, home maintenance expert at Tradefix Direct, says mould doesn’t need a dirty home to thrive.
“Mould does not need a dirty home. It needs water with nowhere to dry. Fix the drying and the mould has nothing to start on.”
Here are four surprising places where mould can quietly develop—and what you can do to prevent it.
Mattress
The underside of a mattress is one of the easiest places for mould to develop unnoticed.
Over its lifetime, a mattress can absorb hundreds of litres of sweat. When placed on a solid bed base with little or no airflow, moisture can become trapped underneath, creating ideal conditions for mould growth.
Kershaw recommends choosing a slatted bed base to improve ventilation, avoiding plastic mattress protectors that trap moisture, and standing the mattress on its side for around an hour once a month to allow it to air properly.
The Washing Machine
Bathrooms aren’t the only damp environment where mould flourishes. Washing machine door seals are another common culprit.
Water collects in the folds of the rubber seal after every wash and, unless it is allowed to dry, mould can begin to grow. Regular low-temperature washes may also fail to eliminate mould spores.
Running an empty maintenance cycle at 60°C or above once a month, wiping inside the rubber seal after the final wash of the day, and leaving both the door and detergent drawer open between washes can all help prevent mould from taking hold.
Car’s Air Conditioning System
Mould isn’t confined to the home. It can also develop inside a vehicle’s air conditioning system.
As air conditioning removes moisture from the air, condensation is normally drained away beneath the vehicle. However, if the drain becomes blocked with leaves or debris, water can accumulate inside the system, allowing mould to grow before being blown into the cabin the next time the fan is switched on.
Drivers are advised to switch off the air conditioning a few minutes before reaching their destination while leaving the fan running, helping the system dry out. Clearing drainage outlets and replacing the cabin air filter annually can also reduce the risk.
Houseplants
While houseplants can improve wellbeing and brighten a room, overwatering them may unintentionally increase the likelihood of mould.
Rooms where humidity regularly exceeds 60% provide ideal conditions for mould growth. Constantly damp compost and excess moisture released into the air can encourage mould to spread to carpets, skirting boards and nearby woodwork.
To reduce the risk, Kershaw suggests watering plants from below, emptying saucers after around 30 minutes, keeping pots away from cold external walls where condensation forms most readily, and adding a layer of grit or decorative stone to the top of the compost to help suppress mould spores.
While bathrooms remain one of the most familiar places to spot mould, experts say checking these lesser-known hotspots—and improving airflow wherever moisture collects—can make a significant difference in preventing it from becoming a much bigger problem.
